NETWORK Ho - Inter-module links.

NETWORK TUTORIAL # 14

Inter-module links on the network.

Important to make everything solid.

This allows to dismount and remount frequently (removable parts or modules for an expo network)

Material - Copper epoxy plates (1 side 2.50 and 2.90 for both sides as on the video).

Neoprene glue

Drill - Drill

Soldering iron and soldering iron

Hand Instrument (Dremel Style) - Abrasive Discs

Cables [...]

Read +

NETWORK Ho - Carpentry relief module.

TURQUIEL NETWORK Ho # 11 Preparation in part of the relief of one of the modules (campaign module with level crossing) Establishment of a first carpentry ... for the creation of reliefs + and - Modules XPO Boismodélisme.com HERE: http://www.boismodelisme.com/store/mo... HD VIDEO on the chain for explanations in practice of this carpentry relief module:
Read +

NETWORK Ho - Background support.

NETWORK TUTORIAL Ho # 7 The placement of the plates that will serve as a background backdrop. Material: Medium 3mm (isorel). Self-drilling plasterboard screws 3.5 x 25 mm Plaster plaster Plaster knife. Matte white acrylic paint. Tutorial on the realization of a background of decoration on letraindejules.fr How are we fixed? HD VIDEO on the channel:
Read +

NETWORK Ho - Track platforms.

NETWORK TUTORIAL Ho # 6 For the trains to be able to roll, we need track platforms that will carry the rails We will proceed to the laying of the running surface of the network with its removable parts. This also involves defining the inputs and outputs of each module. HD VIDEO for some explanations ...
Read +

NETWORK Ho - candles support lighting.

NETWORK TUTORIAL Ho # 5 Achievement of candles network lighting support Cleats - Spruce wood section 4,5 x 2,1 cm Vertical length 60 cm Horizontal length 41 cm Reinforcement length 15 cm Steel screw 4,0 X 50 mm Wood glue Pre-drilling drill 2mm L.Merlin seal greenhouse
Read +

HO NETWORK - integration of modules

NETWORK TUTORIAL Ho # 4 We finished XPO modules. Now we move on to integrating modules with the joinery of the Ho network. We must lower the work schedule. Each module is located 10 cm higher (1m34) than the base. So ... So we have to lower each module. XPO modules - Maxime lame. http: //www.boismodélisme.com HD VIDEO on the channel:
Read +

NETWORK Ho - Modules XPO Boismodélisme.com

NETWORK TUTORIAL Ho # 3

In project 3 Modules XPO Boismodelisme.com for the network Ho.

Thanks to Maxime Boiteux for the supply of the modules.

To find out more about the modules: XPO Modules Boismodélisme.com

http://www.boismodelisme.com/product/…

MATERIEL

Classic wood glue Clamp with conventional pliers - less than 10 € the Dexter pair at Leroy Merlin.

Paintings:

Matte White Paint for Woodwork, Acrylic

Matte black acrylic Luxens from Leroy Merlin.

Vert […]

Read +

NETWORK Ho - structure and storage

NETWORK TUTORIAL Ho # 2

Here is the structure and support of the network with shelves and storage boxes from IKEA are in place.

When I say: Structure and storage, ie the setting up of our shelves ... *

But also by all the storage and classifications of the equipment made available for the realization of the network.

Room 9m² - 3 x 3 meters is relatively small, all [...]

Read +

NETWORK Ho - Adjustable feet

NETWORK TUTORIAL Ho # 1 needs adjustable feet for leveling the network surface

INSTALLATION OF THE STRUCTURE: Installation of the platform supports around the room with IKEA uprights / shelves from IKEA (count around € 7 for an amount / around € 4/5 for a shelf) .Install the adjustable feet wing nuts and screw skates available in all good hardware stores.

The […]

Read +

Easy adjustable feet

Your adjustable feet made in 4 steps with letraindejules.fr
Step 1 - the material

Four feet equipped with rubber pellets that you can buy in the supermarket DIY department (at a low price of € 4) or specialty stores.

Hard to find?
Replace with round or square head studs.
Then add a piece of self-adhesive felt.
This will avoid scratching the floor of sports halls during your exhibitions (= boyfriend with [...]

Read +

Network frontage

The network façade ... back to its implementation.
It is obviously simpler on a module or a diorama ... less in length, you will directly fix your network front on the frame.
The network façade will allow to delimit the space and to materialize the positive and negative reliefs.
How to fix this network façade?
First, the support rails of the facade (above the underground station) are put in place on the frames of the modules. [...]

Read +

Background scenery

The backdrop ... we do not know, by which side to take ...
Some will do it in blue with bomb clouds (which I did at first) ...
Others will stick a photographic backdrop, bought in the trade or make it by printing on special paper.
Background decoration with paint ...

It is certainly the cheapest, but not the easiest to do. You may have [...]

Read +
en_USEnglish
fr_FRFrançais en_USEnglish